ECM Equipment

Each order is produced on one of our Marquip Precision Sheeters with dual rotary knife technology, for a perfect cut every time.

Standard Machine Specifications
    Cut Length
                 Minimum:           18"
                Maximum:           98" for .012 & above
                                         90" for .010 - .011
                                         70" for .009 or below
    Cut Width
                  Minimum:          12"
                  Maximum:         87"
      Minimum 36" for:         69" - 80" long sheets
      Minimum 40" for:         80 1/32" - 90" long sheets

Standard Board Specifications
    Calipers:                         .007 - .030
    Roll Diameter Maximum:  73"
    Roll Width Maximum:      90"
    Roll Core Diameter:        3" to 16"

Guillotine
    Grain direction is unimportant.
                   Minimum:        18" x 12"
                   Maximum:        30" x 50"

NOTE: There is some flexibility in the above parameters.
            Additional charges may apply to:    Cut lengths over 69"
                                                                 Sheet sizes smaller than 12" x 20"

For special project information and pricing contact ECM Customer Service at (800) 974-9770 ext. 1.